Pump vacuum brazing furnace temperature is too high

Pump vacuum brazing furnace temperature is too high

Vacuum brazing furnace will inevitably be in the process of using all kinds of fault, pump vacuum brazing furnace temperature is too high? The following vacuum furnace manufacturers to share the solution.
(1) check the thermostat setting of the temperature control pump is in accordance with the regulations. If not, should be reset.
(2) pump cooling water flow rate of solid scale or other dirt jam for smaller. Lead to rising pump Yun. Because oil pump must have certain viscosity to ensure the sealing of pump. The viscosity is too small, the sealing performance variation. And pump oil viscosity with temperature rise and fall. The sealing of pump, oil saturation vapor pressure increases, vacuum degree reduced. Solution is to dredge waterways. Increase the flow of cooling water, the temperature of the oil pump shall not exceed 0 ℃ o l e., it is about 0 ℃.
(3) components assembly is undeserved, cause wear and tear, should be reassembled.